Vortex Ladies FR Arc-Rated Hi-Vis Trousers – Short Leg

Yes. These trousers are designed and certified for arc flash and flame protection: they use inherent flame-retardant Modacrylic blended with cotton (60/40) and meet EN ISO 11612:2015 (A1 B1 C1) for heat and flame exposure. They carry an arc rating under IEC 61482 standards with an ATPV of 8.2 cal/cm², which is a measurable performance value showing the energy level they can withstand. Additional safety details include antistatic properties and EN 1149 compliance plus heat-applied reflective tape for visibility under EN ISO 20471 Class 2. Workers who benefit most are utility technicians, engineers, and industrial staff exposed to arc flash or flash fire risks who need certified FR garments. Note that the ATPV of 8.2 cal/cm² sets a performance limit, so for tasks with higher arc energy requirements you should choose garments with a higher ATPV or follow your site risk assessment and PPE policy.

Yes. The VORTEX trousers are tailored with a short leg fit specifically for female professionals and include practical features that support kneeling and mobility. Key design elements are the short leg tailoring for better fit, elastication at the waistband sides for comfort during movement, and internal bottom-loading knee pad pockets that let you insert knee pads without affecting the outer profile. The 250 GSM fabric weight gives a balance of durability and flexibility for active work. These trousers suit female tradespeople, engineers, and field operatives who kneel frequently or require a cropped leg length. As a practical note, verify the knee pad pocket dimensions against your preferred knee insert because compatibility varies by pad model, and consult sizing to ensure the short leg length matches your preferred inseam.

They provide stronger visibility and electrostatic protection than typical non-certified work trousers. Specifically, VORTEX trousers use heat-applied reflective tape and meet EN ISO 20471:2013+A1:2016 Class 2 for high visibility, which is a tested standard for garment reflectivity and background area. For electrostatic hazard control they comply with EN 1149-5 and EN 1149-3, meaning the fabric has antistatic performance built into the 60% Modacrylic/40% Cotton blend. Regular work trousers often lack these EN certifications and the inherent flame-retardant construction. These features are most valuable for workers operating near energized equipment, in low-light sites, or where static discharge is a concern. Keep in mind Class 2 visibility is suitable for many tasks but may not replace a higher-spec layer if your site requires enhanced high-visibility ensembles.